Thousands of low-vision sufferers could be helped every year with a corneal graft. But with comparatively few donor corneas available, synthetic corneas are a medical necessity. Oxford MEStar, a bioengineering products and solutions company produces such artificial corneas. Gary Livingstone, Managing Director of LG Motion explains in his article, "Vision checks optical characteristics of artificial corneas," how his company developed a semi-automated inspection system for MEStar to tackle a demanding quality inspection task involving these delicate transparent prostheses. LG Motion's vision-based motion control system features an embedded Scorpion Compact Vision System that processes the automated optical inspection.
Fig. 1: LG Motion's vision-based motion control system featuring Scorpion Vision Software inside, connected to a USB3 camera.
Translucency Poses a Challenge to Efficient Inspection
Because the artificial corneas are medical implants, they are of course subject to strict controls. One of the most critical aspects of the control process is the transparency measurement of each cornea which is performed via laser analysis. But exactly this important characteristic, transparency, had made an in-line inspection process problematic. The corneas and their support scaffolds are suspended in a transparent medium in a Petri dish and vacuum packed into sterile blister packs (Fig. 2, below). Locating the transparent cornea within the packaging proved difficult which meant a trained operator was needed to correctly position them for optical analysis in the laser's field of view. Wishing to semi-automate this inspection task as part of an in-line production process, MEStar contacted LG Motion.
Fig. 2: The artificial corneas and their integral supporting scaffolds are suspended in a transparent gel and sealed in clear plastic blister packs.
Solution: Structured Light and a Monochrome Industrial Camera
An integral part of the vision-based motion control system created by LG Motion is Scorpion Vision's Compact Vision System. In order to differentiate between the transparent substances within each blister pack, the inspected samples are first illuminated by a patterned, red LED (0.25mm grid pattern from wire mesh) (Fig. 3). The built-in USB 3.0 monochrome camera captures the grid pattern image and transmits the image data to the Scorpion Compact Vision System for analysis. The distortion of the light pattern allows the software to identify the edge of the Petri dish thereby creating a region of interest in which the cornea can be found. Edge detection and geometry tools are then further used to precisely locate the cornea. Once the cornea has been detected, the system determines its centre coordinates and then optimally adjusts the package in preparation for optical analysis.
The Corneal Inspection System was designed and built by LG motion at their factory in Basingstoke, Hampshire and is sold internationally,with the first system being shipped to China. The core component, unseen but critical, is the Scorpion Compact Vision System that processes every single cornea.